Konica Minolta bizhub 40P - Manual (Page 307)

Configuring the Printer 289
Size Settings Specifies whether the paper size for Tray
2 is automatically detected or set by a
user.
Choices: Auto, User Select
Default: Auto
Configuration Menu Equivalent:
PAPER MENU - PAPER
SOURCE - TRAY2 - SIZE
SETTING
Tray3
This item
appears only if
an optional lower
feeder unit is
installed.
Paper Size Displays the setting for the size of paper
loaded into Tray 3.
Configuration Menu Equivalent:
PAPER MENU - PAPER
SOURCE - TRAY3 - PAPER
SIZE
Width Specifies the paper width when Paper
Size is set to Custom Size.
Range: 3.87- 8.50 (inch) /
98 - 216 (mm)
Configuration Menu Equivalent:
PAPER MENU - PAPER
SOURCE - TRAY3 -
CUSTOM SIZE - WIDTH
Length Specifies the paper length when Paper
Size is set to Custom Size.
Range: 5.83 - 14.00 (inch) /
148 - 356 (mm)
Configuration Menu Equivalent:
PAPER MENU - PAPER
SOURCE - TRAY3 -
CUSTOM SIZE - LENGTH
Item Description