Konica Minolta bizhub 40P - Manual (Page 113)

Troubleshooting 95
Troubleshooting
Symptom Solution
The setting in the saved
presets are not applied. Depending on the functions selected for the
printer, some preset settings are not saved.
Media type error appears. Be sure to specify a media type supported by
Tray 1, Tray 2, Tray 3 and Tray 4.
The printer stops respond-
ing. Depending on the operating system, some
paper size and paper type combinations are
not permitted. If the job was sent with an
incorrect combination of settings, the printer
stops responding. Be sure to print with the
correct combination of paper size and paper
type settings.
Checking the version num-
ber of the printer driver and
PPD file. „ For Mac OS X 10.4:
Select the printer from Printer Setup Util-
ity, and then click Show Info in the Print-
ers menu. In the pop-up menu of the
Printer Info dialog box, select Name &
Location.
„ For Mac OS X 10.5/10.6:
Select the printer from Print & Fax, and
then click Options & Supplies. Click Gen-
eral tab.
The dialog box displays
incorrectly after you select
another manufacture’s
printer and then select the
bizhub 40P again. Close the Print dialog box, and then open it
again.
The custom paper size is
different from the size that
was set. Depending on the operating system, the cus-
tom paper size settings may change slightly
(for example, 5.80" may change to 5.79").
When printing 2 pages on a
single sheet of paper, the
pages are not centered on
the paper. Depending on the operating system, the
pages are not centered on the paper when
printing two pages on a single sheet of paper
with the following paper sizes.
Legal, Letter Plus, Foolscap, Government
Legal, Statement, Folio