Konica Minolta bizhub 40P - Manual (Page 327)

Configuring the Printer 309
IP Address* Sets the printer’s IPv4 address.
Range: 0–255 for each xxx triplet
Default: 0.0.0.0
"
If the specified IPv4 address is outside of the
allowable range, the value is not changed, even
after the Apply button is clicked. The setting
returns to the previous value.
Configuration Menu Equivalent:
INTERFACE MENU - ETHERNET - TCP/
IP - IP ADDRESS
Subnet Mask* Sets the printer’s subnet mask address.
Range: 0–255 for each xxx triplet
Default: 0.0.0.0
"
If the specified subnet mask address is outside of
the allowable range, the value is not changed, even
after the Apply button is clicked. The setting
returns to the previous value.
Configuration Menu Equivalent:
INTERFACE MENU - ETHERNET - TCP/
IP - SUBNET MASK
Default Gateway* If a router is used on the network, sets the router’s
address.
Range: 0–255 for each xxx triplet
Default: 0.0.0.0
"
If the specified router address is outside of the
allowable range, the value is not changed, even
after the Apply button is clicked. The setting
returns to the previous value.
Configuration Menu Equivalent:
INTERFACE MENU - ETHERNET - TCP/
IP - DEFAULT GATEWAY
Apply button Applies the configuration settings for this window.
Clear button Resets all configuration settings to previous values.
* Always enter these addresses without leading zeros. For example,
131.011.010.001 should be entered as 131.11.10.1.
Item Description