Aastra Telecom 9480i CT - Manual (Page 255)

Model 9480i CT IP Phone User Guide 245
Additional Features
Message Waiting Indicator
You can configure the Message Waiting Indicator (MWI) to illuminate for a specific line or for all
lines. For example, if you configure the MWI LED on line 3 only, the LED illuminates if a voice
mail is pending on line 3. If you configure the MWI LED for all lines, the LED illuminates if a
voice mail is pending on any line on the phone (lines 1 through 9).
You configure the MWI indicator using the Aastra Web UI.
Configuring Message Waiting Indicator
Use the following procedure to configure the message waiting indicator on a specific line or on all
lines on the IP phone.
1. Click Basic Settings->Preferences->General.
2. The "Message Waiting Indicator Line" field is set to ALL lines by default. If required,
change the setting to a specific line by selecting a line from the list. Valid values are All and
lines 1 through 9.
3. Click to save your settings.
Aastra Web UI
Note: "Message Waiting Indicator Line" parameter is set to ALL lines by default.