Aastra Telecom 9480i CT - Manual (Page 118)

Configuring Park/Pickup using Key Configuration
Use the following procedure to configure the Park/Pickup call feature using the softkey
configuration method.
Use the following procedure to configure a Park/Pickup key on the 9480i CT IP Phone.
1. Click Operation->Softkeys and XML.
Softkeys
2. Select from "Key 1" through "Key 20".
3. In the "Type" field, select Park.
4. In the "Label" field, enter a label for the Park softkey.
5. In the "Value" field, enter the appropriate value based on the server in your network.
6. In the "Line" field, select a line for which to apply the Park configuration.
7. Check (enable) or uncheck (disable) the "Connected" state to apply to this softkey.
8. Pick another softkey to configure for Picking up a call.
9. In the "Label" field, enter a label for the Pickup softkey.
10. In the "Value" field, enter the appropriate value based on the server in your network.
Note: For values to enter in the “Value” fields, see the table “Park/Pickup Call
Server Configuration Values” on page 105 .
Aastra Web UI