9 [system connection, Call remote center, Openapi settings – Konica Minolta bizhub C3850 User Manual
Page 59
5.9
[System Connection]
5
[Description of Utility Keys]
5-31
5.9
[System Connection]
[Call Remote Center]
To display: [Utility] - [Administrator Settings] - [System Connection] - [Call Remote Center]
When using a service that diagnoses the machine status remotely, send the machine's operating status to
the remote diagnosis system.
[OpenAPI Settings]
To display: [Utility] - [Administrator Settings] - [System Connection] - [OpenAPI Settings]
To use application software that communicates with this machine via OpenAPI, configure the OpenAPI set-
tings of this machine.
Settings
Description
[Specified App Start
Setting]
Configure a setting to launch only the pre-specified OpenAPI application when
this machine has started up.
Note
This item is displayed when the OpenAPI application is registered.
[Specified Applica-
tion Start]
Select whether or not to launch only the pre-specified OpenAPI application
when this machine has started up.
[Disable] is specified by default.
[Basic Functions
Setting]
When using this function, select whether or not to use the basic functions of
this machine.
[Restrict] is specified by default.
Note
This option is displayed when [Specified Application Start] is set to [Enable].
[Default Startup
App Selection]
When using this function, specify the OpenAPI application to be launched.
Note
This option is displayed when [Specified Application Start] is set to [Enable].