3 [copier settings, Auto zoom for combine, Default copy settings – Konica Minolta bizhub C3850 User Manual
Page 23: Separate scan output method
4.3
[Copier Settings]
4
[Description of Utility Keys]
4-5
4.3
[Copier Settings]
[Auto Zoom for Combine]
To display: [Utility] - [User Settings] - [Copier Settings] - [Auto Zoom for Combine]
Select whether or not to adjust the image automatically to optimal zoom ratio when you specify [Combine]
and select [Auto] for [Paper].
-
[Auto Display Zoom Ratio]: Automatically adjusts to the optimal zoom ratio.
-
[OFF]: Select this option to specify the zoom ratio manually.
[Auto Display Zoom Ratio] is specified by default.
[Default Copy Settings]
To display: [Utility] - [User Settings] - [Copier Settings] - [Default Copy Settings]
Change the default settings (settings when the power is turned on, or the Reset is pressed) in copy mode.
You can change the setting by selecting [Current Setting] after the setting in copy mode is changed.
[Factory Default] is specified by default.
[Separate Scan Output Method]
To display: [Utility] - [User Settings] - [Copier Settings] - [Separate Scan Output Method]
Select the timing that the machine starts printing when scanning an original by specifying [Separate Scan].
-
[Page Print]: Printing begins while the original is being scanned. Select this option if you want to focus
on efficiency.
-
[Batch Print]: Printing begins after all originals are scanned. You can delete data before printing begins
if you find an incorrect setting etc.
[Page Print] is specified by default.