List/counter, Priority tray, List/counter] -6 [priority tray] -6 – Konica Minolta bizhub C3850 User Manual

Page 34

[Description of Utility Keys]

5-6

5.1

[System Settings]

[List/Counter]

To display: [Utility] - [Administrator Settings] - [System Settings] - [List/Counter]

Prints the job setting list of this machine and configure the paper count.

[Priority Tray]

To display: [Utility] - [Administrator Settings] - [System Settings] - [Priority Tray]

Select a tray to be used with top priority.

If paper of the same size is loaded in multiple trays, paper is fed from the tray with top priority.

[Tray 1] is specified by default.

[Paper Separation Ad-
justment]

Adjust the paper separation position on each side of paper for 2-sided printing.
•

[Front]: Adjust the balance of the paper separation or image transfer per-
formance when a paper jam or image failure occurs on the front side for 1-
sided or 2-sided printing due to high ambient temperature and humidity.

•

[Back]: Adjust the balance of the paper separation or image transfer perfor-
mance when a paper jam or image failure occurs on the back side for 2-
sided printing due to high ambient temperature and humidity.

Increase the value if paper jams are occurring, and decrease it if the image is
transferred unevenly.
[0.0 mm] is specified by default.

[Main Scan Direction
Zoom Adjustment]

Adjust the zoom ratio in the main scanning direction for each color.
[0] is specified by default.

[Main Scan Direction
Zoom Adjustment Con-
firmation Printing]

Print a test pattern to adjust the zoom ratio in the main scanning direction.

[List Output]

Print error log information or halftone patterns.

[Event Log]

Print event logs such as error logs or consumable replacement histories.

[Halftone 64]

Print a halftone pattern of density 25% for each color.

[Halftone 128]

Print a halftone pattern of density 50% for each color.

[Halftone 256]

Print a halftone pattern of density 100% for each color.

[Gradation]

Print a gradation pattern.

[Life]

Configure a setting to replace consumables.

[New Release]

Reset the counter value after replacing the fusing unit, transfer belt unit, trans-
fer roller unit, and toner filter.

[User Paper Settings]

[Media Adjustment]: Select Front Side/Back Side or Color/Black to make
adjustments when an error has occurred on a print image of the user paper.

•

[Basic Weight]: Specify the weight of the user paper. The following shows
the default settings.
[User1]/[User2]: [77]
[User3]: [105]
[User4]: [139]
[User5]: [183]

•

[Test Pattern Output]: Prints test patterns on the selected user paper.

Settings

Description

Settings

Description

[Management List]

Prints a list of settings for [User Settings] and [Administrator Settings] among
others.