Konica Minolta bizhub C3850 - Manual (Page 56)

[Description of Utility Keys] 5-28
5.8 [Fax Settings] 5
[Output Settings] Specify whether or not to print an activity report. To print it, select when to print
it.
•
[Daily]: Prints an activity report at a specified time you entered in [Output
Time Setting] every day.
• [Every 100 comm.]: Prints an activity report every 100 communications.
• [100/Daily]: Prints an activity report at a specified time you entered in [Out-
put Time Setting] every day. In addition, a report is printed for every 100
communications.
• [OFF]: Does not print an activity report.
[Every 100 comm.] is specified by default.
[Output Time Set-
ting] If [Daily] or [100/Daily] is selected in [Output Settings], enter the time to print a
report.
[00:00] is specified by default.
[Output Limit Set-
ting] If [Daily] or [100/Daily] is selected in [Output Settings], select whether to print
a report of the latest 100 communications or a report of communications
(which are established after communications described in the previously print-
ed report have occurred) within the last 24 hours.
[100 Communications] is specified by default.
[Remark Column
Print Setup] Select whether or not to print user or account name in the remarks column of
the activity report if user authentication or account track is enabled for this ma-
chine.
•
[Normal Printing]: The line status or sending setting will be printed.
• [User Name Printing]: The user name for user authentication will be printed.
• [Account Name Printing]: The account name for user authentication will be
printed.
[Normal Printing] is specified by default.
[TX Result Report] Specify the method to print a report (TX result report) that contains fax trans-
mission results.
[Output Settings] Select the timing to print a transmission result report.
•
[ON]: The report is printed every time a fax has been transmitted.
• [If TX Fails]: The report is printed if a fax transmission has failed.
• [OFF]: Does not print a TX result report.
[If TX Fails] is specified by default.
[TX Result Report
Image] Select whether or not to print a reduced image on the first page of an original,
on a transmission result report.
[OFF] is specified by default.
[Timer Reservation TX
Report] Select whether or not to print a report (timer reservation TX report) that con-
tains reserved fax transmissions using the Timer TX function.
[ON] is specified by default.
[Confidential Rx Report] Select whether or not to print a report (confidential RX report) that contains
confidential RX results.
[ON] is specified by default.
[PC-Fax TX Error Re-
port] Select whether or not to print a report (PC-Fax TX error report) for notifying that
a PC-Fax transmission has failed.
[OFF] is specified by default.
[Broadcast Result Re-
port] Specify the method to print a report (broadcast result report) that contains
broadcasting results.
[Enable Settings] Select whether or not to print a broadcast result report.
[ON] is specified by default.
[Output Settings] Select whether to combine results of broadcast on all destinations involved or
list them for each destination.
[All Destinations] is specified by default.
[TX Result Report
Check] Select whether or not to display a screen that asks if you want to print a TX
Result Report each time a fax is sent.
[OFF] is specified by default.
[I-Fax RX Error Report] Select whether or not to print a report (Internet fax RX error report) for notifying
that Internet fax receiving has failed.
[ON] is specified by default.
[MDN Message] Select whether or not to print a report notifying that an Internet fax has been
sent to the recipient machine.
[ON] is specified by default.
Settings Description