Konica Minolta bizhub C3850 - Manual (Page 14)

[Description of Utility Keys] 3-3
3
Tips
- To check the settings for a registered destination, select its registered name, then tap [Check Settings].
- To change the settings for a registered destination, select the registered name, then tap [Edit].
- To delete a registered destination, select the registered name, then tap [Delete].
[SMB]
To display: [Utility] - [One-Touch/User Box Registration] - [SMB] - [New]
Register a destination computer name (host name) or IP address. Also register a folder for saving a file or
information for accessing a folder.
[Line Settings] If necessary, specify how to send a fax to a destination you want to register.
You may change the settings you made here before sending a fax.
•
[ECM]: ECM is an error correction mode defined by ITU-T (International Tel-
ecommunication Union - Telecommunication Standardization Sector). Fax
machines equipped with the ECM feature communicate with each other,
confirming that the sent data is free of errors. This prevents image blurring
caused by telephone line noise.
If you send a fax using a telephone line in an environment containing static,
it may take a longer time to communicate. In this case, the communication
time can be reduced by setting ECM to OFF for transmission. However, im-
age or communication errors may occur depending on the specified com-
munication time value, so change the value to suit conditions.
• [V.34]: V34 is a communication mode used for super G3 fax communica-
tion. However, when the remote machine or this machine is connected to
a telephone line via PBX, you may not establish a communication in super
G3 mode depending on telephone line conditions. In this case, it is recom-
mended that you set the V34 mode to off to send data.
• [Check Dest. & Send]: Set this option to ON when the Check Dest. & Send
function is used. The fax number specified for fax is checked against the
destination fax number (CSI), and the fax is sent only when they match.
Settings Description
Settings Description
[No.] Destination registration number. The smallest available number that is not
used is automatically assigned.
[Name] Enter the destination name (using up to 72 characters).
[Favorite] Select this option to register a frequently used destination. The registered des-
tination is displayed in [Favorite], enabling you to easily specify a destination.
[Index] Select a corresponding character so that the destination can be index
searched by name.
[Connection] Register a destination computer name (host name) or IP address.