Konica Minolta bizhub C3850 - Manual (Page 25)

4.5 [Printer Settings] 4
[Description of Utility Keys] 4-7
4.5 [Printer Settings]
[Paper Setting]
To display: [Utility] - [User Settings] - [Printer Settings] - [Paper Setting]
Configure the paper and paper tray settings used for printing, and the setting on printing condition if no set-
ting is specified by the printer driver.
Settings Description
[Paper Tray] Configure the settings on the paper tray.
[Tray 2] and [Tray 3] are available when the optional Paper Feed Unit is in-
stalled.
[Default Tray] Select a paper tray you want to use preferentially.
[Tray 1] is specified by default.
[Manual Feed] Specify the size and type of the paper loaded in Manual Feed Tray.
•
[Paper Size]: When loading a standard size paper, select the paper size.
• [Custom Size]: Enter the width and length of paper when using custom-size
paper.
• [Paper Type]: Select the type of the paper loaded in the tray.
[Tray 1] Specify the size and type of the paper loaded in Tray 1.
•
[Paper Size]: When loading a standard size paper, select the paper size.
• [Paper Type]: Select the type of the paper loaded in the tray.
[Tray 2] Specify the size and type of the paper loaded in Tray 2.
•
[Paper Size]: Displays the size of the loaded paper.
• [Paper Type]: Select the type of the paper loaded in the tray.
[Tray 3] Specify the size and type of the paper loaded in Tray 3.
•
[Paper Size]: Displays the size of the loaded paper.
• [Paper Type]: Select the type of the paper loaded in the tray.
[Duplex] Select whether or not to enable 2-sided printing.
[OFF] is specified by default.
[Number of Copies] Enter the number of copies to be printed.
[1] is specified by default.
[Collate] When multiple sets of copies are printed, select whether the paper output po-
sition of each set is staggered to help you locate the first page of each set.
[OFF] is specified by default.
[Binding Position] Select the binding position for 2-sided printing.
[Left Bind] is selected by default.
[Auto Tray Switching] When the paper tray has become empty during printing, select whether or not
to allow automatic switching to a paper tray that contains paper of the same
size, same orientation, and same type (ATS: Auto Tray Switch).
[ON] is specified by default.
[Tray Mapping] Specify the paper tray to be used for printing when a print job is received by a
printer driver manufactured by another company.
[Tray Mapping
Mode] Select whether or not to enable the tray mapping.
[OFF] is specified by default.
[Logical Tray 0] to
[Logical Tray 9] Assigns logical trays 0 to 9 to physical trays.
[Original Direction] Select the orientation of the image to be printed.
[PORTRAIT] is specified by default.
[Minimal Print] Select whether or not to slightly reduce the full page size when directly printing
a PDF, PPML, or OOXML (docx, xlsx, or pptx) file.
This function is available when printing the entire original image, including its
edges.
[OFF] is specified by default.
[TIFF Image Paper Set-
ting] Specify the method for determining the paper to be used when a TIFF, JPEG,
or PDF file is directly printed.
•
[Auto]: Prints on paper that matches the image size.
• [Priority Paper Size]: Prints on the primary paper size.
[Priority Paper Size] is specified by default.