Konica Minolta Magicolor 5430 - Manual (Page 73)

Replacing Consumables 65
"
The printer must complete a 75-second calibration cycle after the
toner cartridge has been replaced. If you open the front cover
before the message
READY appears, the printer stops and
repeats the calibration cycle.
Replacing the Waste Toner Bottle
When the waste toner bottle becomes full, the message WASTE BOTTLE
FULL appears in the message window. The printer stops and will not start
again until the waste toner bottle is replaced.
1
Open the printer’s front cover.
2
Turn the dial on the waste toner
bottle counterclockwise until it is
in the unlock position.
Lock Unlock