Thick stock, Thick stock 34, Media types 34 – Konica Minolta Magicolor 5430 User Manual
Page 42
Media Types
34
"
Keep media between 35% and 85% relative humidity. Toner does
not adhere well to moist or wet paper.
Layered
Adhesive
Folded, creased, curled, embossed, warped, or wrinkled
Perforated, three-hole punched, or torn
Too slick, too coarse, or too textured
Different in texture (roughness) on the front and back
Too thin or too thick
Stuck together with static electricity
Composed of foil or gilt; too luminous
Heat sensitive or cannot withstand the fusing temperature (180°C
[356°F])
Irregularly shaped (not rectangular or not cut at right angles)
Attached with glue, tape, paper clips, staples, ribbons, hooks, or buttons
Acidic
Any other media that is not approved
Thick Stock
Paper thicker than 90 g/m
2
(24 lb bond) is referred to as thick stock. Test all
thick stock to ensure acceptable performance and to ensure that the image
does not shift.
DO NOT use thick stock that is
Mixed with any other media in the trays (as this will cause printer misfeed-
ing)
Capacity
Tray 1
Up to 20 thick stock sheets, depending on
their thickness.
Tray 2 and 3 Not
supported
Orientation Face up
Driver
Media Type
Thick stock 1 (91-150 g/m
2
)
Thick stock 2 (151-210 g/m
2
)
Weight
91–210 g/m² (25–55.9 lb)
Duplexing
Not supported