Konica Minolta Magicolor 5430 - Manual (Page 115)

Solving Problems with Media Misfeeds 107
Media is
misfeeding. Transparencies have
collected static elec-
tricity in the tray. Remove the transparencies and load
them in the tray one sheet at a time.
Do not fan transparencies before load-
ing them.
Unsupported media
(wrong size, thick-
ness, type, etc.) is
being used. Use KONICA MINOLTA-approved
media.
See “Media Specifications” on page 32
for supported size.
The media roller is
dirty. Clean the media supply roller.
For more details, refer to “Media Roll-
ers” on page 83.
Symptom Cause Solution