Konica Minolta Magicolor 5430 - Manual (Page 125)

Solving Problems with Printing Quality 117
If the problem is not resolved, even after all of the above have been per-
formed, contact Technical Support with the error information.
Line art does
not print in
color. The line art setting for
2400 x 600 dpi
requires Color Match-
ing to be turned off. In the driver, go to Properties/Quality
and choose Off in the Color Matching
section.
If you want color, lower the resolution
to 1200 x 600 or 600 x 600.
The color
has a poor
reproduction
or has poor
color density. One or more of the
toner cartridges are
defective. Remove the toner cartridges and
check them for damage. If one is dam-
aged, replace it.
Symptom Cause Solution