Konica Minolta Magicolor 5430 - Manual (Page 44)

Media Types 36
Labels
A sheet of labels consists of a face sheet (the printing surface), adhesive, and
a carrier sheet:
„ The face sheet must follow the plain paper specification.
„ The face sheet surface must cover the entire carrier sheet, and no adhe-
sive should come through on the surface.
You can print continuously with label sheets. However, this could affect the
media feed, depending on the media quality and printing environment. If
problems occur, stop the continuous printing and print one sheet at a time.
Format label data within your application. Try printing your data on a sheet of
plain paper first to check placement. Check your application documentation
for more information on printing labels.
Use label sheets that are
„ Recommended for laser printers
„ Letter or A4 size (adhesive label stock)
DO NOT use label sheets that
„ Have labels that easily peel off
„ Have backing sheets that have peeled away or have exposed adhesive
"
Labels may stick to the fuser, causing them to peel off and media
misfeeds to occur.
Capacity Tray 1 Up to 20 label sheets, depending on their
thickness
Tray 2 and 3 Not supported
Orientation Face up
Driver
Media Type
Labels
Weight 60–163 g/m² (16–90 lb)
Duplexing Not supported