Konica Minolta Magicolor 5430 - Manual (Page 103)

Clearing Media Misfeeds 95
4
Pull out Tray 1, and then remove
all media from the tray.
5
Fan the media you removed and
then align it well.
"
If transparencies are loaded, do not fan them; otherwise, static
electricity may be produced, resulting in another media misfeed.
6
Load the media face up in Tray 1.
"
Make sure that the media is flat.
"
Do not load paper above the M mark.
Do not load more than 10 envelopes or 20 sheets of labels, post-
cards, thick stock, or transparencies at one time.
"
Slide the media guides against the edges of the media.
7
Close Tray 1.