Konica Minolta Magicolor 5430 - Manual (Page 36)

Configuration Menu Overview 28
Network Menu
If the printer is connected to a network, the following settings should be spec-
ified. For details about each setting, contact your network administrator.
DHCP
Settings
DHCP SET:ON
BOOTP SET:OFF
DHCP SET:OFF
BOOTP SET:ON
DHCP SET:OFF
BOOTP SET:OFF
If there is a DHCP server on the network, specifies whether
the IP address is automatically assigned by the DHCP server
and other network information is loaded (can be set to
ON or
OFF ).
BOOTP
Specifies whether the IP address is automatically assigned by
BOOTP and other network information is loaded (can be set to
ON or OFF ).
IP
ADDRESS
Setting
192.168.1.2
Sets the IP address of this printer on the network. Use the Up,
Down, Left, and Right keys to enter the value.
When manually setting the IP address, first set DHCP and
BOOTP to
OFF .
SUBNET
MASK
Setting
255.255.255.0
Sets the subnet mask value of the network. Use the Up,
Down, Left, and Right keys to enter the value. When manually
setting the Subnet Mask, first set DHCP and BOOTP to
OFF .
GATEWAY
Setting
192.168.1.1
If a router is used on the network, enter the IP address of the
router. Use the Up, Down, Left, and Right keys to enter the
value. When manually setting the Gateway, first set DHCP
and BOOTP to
OFF .
MAC
ADDRESS
Displays Ethernet hardware address for this printer. (It cannot
be changed.)
HTTP
Settings
ON / OFF
HTTP can be set to ON or OFF . ON enables the Internal Web
Page inside the printer, OFF disables it.