beautypg.com

Konica Minolta bizhub C353 User Manual

Page 9

background image

C353/C253/C203

1-3

Before use

1

6

[Reset] key

Press to clear all settings (except programmed settings)
entered in the control panel and touch panel.

7

[Stop] key

Pressing the [Stop] key during an operation temporarily
stops the operation.

8

[Proof Copy] key

Press to print a single proof copy to be checked before
printing a large number of copies. (See

p. 2-42

)

9

[Start] key

Press to start the operation. When this machine is ready
to begin the operation, the indicator on the [Start] key
lights up in blue. If the indicator on the [Start] key lights
up in orange, the operation cannot begin.
Press to restart a stopped job.

10

Data indicator

Flashes in blue while a print job or fax is being received.
Lights up in blue while a print job or fax is queued to be
printed or is being printed.

11

[C] (clear) key

Press to clear a value (such as the number of copies, a
zoom ratio, or a size) entered using the keypad.

12

Keypad

Use to type in the number of copies to be produced.
Use to type in the zoom ratio.
Use to type in the various settings.

13

[Enlarge Display] key

Press to enter or exit Enlarge Display mode. If
authentication is performed with PageScope
Authentication Manager, it does not enter Enlarge
Display mode.

14

[Accessibility] key

Press to display the screen for specifying settings for
user accessibility functions.

15

[Power Save] key

Press to enter Low Power mode. While the machine is in
Low Power mode, the indicator on the [Power Save] key
lights up in green and the touch panel goes off. To
cancel Low Power mode, press the [Power Save] key
again.

16

[Access] key

If user authentication or account track settings have
been applied, press this key after entering the user name
and password (for user authentication) or the account
name and password (for account track) in order to use
this machine.

17

Brightness dial

Use to adjust the brightness of the touch panel.

18

[Fax/Scan] key

Press to enter Fax/Scan mode.
While the machine is in Fax/Scan mode, the indicator on
the [Fax/Scan] key lights up in green.

19

[Copy] key

Press to enter Copy mode. (As a default, the standard-
sized Copy mode screen is displayed.)
While the machine is in Copy mode, the indicator on the
[Copy] key lights up in green.

No.

Part name

Description

This manual is related to the following products: