2 placing the original on the original glass, 2 placing the original on the original glass -13 – Konica Minolta bizhub C353 User Manual
Page 19
C353/C253/C203
1-13
Before use
1
2
Slide the lateral guides against the edges of the original.
1.5.2
Placing the original on the original glass
1
Lift open the ADF or the original cover.
– When placing the original on the original glass, be sure to lift open the
ADF or the original cover at least 20°. If the original is placed on the
original glass without the ADF being lifted at least 20°, the correct original
size will not be detected.
2
Place the original on the original glass with the side to be scanned
faces down.
– Load the original pages so that the top of the original is toward the back
or the left side of the machine.
Lateral guides
When loaded in the v orientation: When loaded in the w orientation:
20°
20°
This manual is related to the following products: