Konica Minolta bizhub C353 - Manual (Page 60)

C353/C253/C203 2-31
Using copy functions 2
2.11 Selecting the Paper settings
2.11.1 Selecting a Paper Type setting
If paper other than plain paper, such as OHP transparencies or special paper,
is loaded in a paper tray, be sure to change the paper type setting for that tray.
The following procedure describes how to specify the setting for special paper
loaded into the bypass tray.
2
Note
There are limits on the types of paper that can be loaded in a paper tray. For
details on the types of paper that can be loaded, refer to the User’s Guide [Copy
Operations].
2
Reminder
If special paper is loaded into a paper tray, be sure to select the corresponding
paper type for that tray, otherwise a paper misfeed may occur.
1
In the Basic screen, touch [Paper].
The Paper screen appears.