Konica Minolta bizhub C353 - Manual (Page 47)

C353/C253/C203 2-18
Using copy functions 2
*5
The number of punched holes differ depending on the country (region)
where the unit is installed. For details, consult your service representative.
*6
The Half-Fold and Center Staple settings are available only if the saddle
stitcher is installed on optional finisher FS-519.
*7
The Center Staple & Fold settings are available if the saddle stitcher is
installed on optional finisher FS-519 or optional finisher FS-609 is installed.
Follow the procedures described below to select Finishing settings.
2.7.1 Selecting the finishing method
1
In the Basic screen, touch [Finishing].
The Finishing screen appears.
2
Select the desired Finishing settings.
– To return to the main screen, touch [Main Screen].
3
Touch [OK].
The Basic screen appears again.