3 using fax/scan functions, 1 general fax/scan operation, 1 general fax/scan operation -2 – Konica Minolta bizhub C353 User Manual
Page 74: 3using fax/scan functions
C353/C253/C203
3-2
Using fax/scan functions
3
3
Using fax/scan functions
3.1
General fax/scan operation
2
Note
For details on performing fax and scan operations, refer to the User’s Guide
[Network Scan/Fax/Network Fax Operations].
!
Detail
Specify the fax settings and network settings and register destinations before
entering Enlarge Display mode. For details, refer to the User’s Guide [Network
Scan/Fax/Network Fax Operations] and the User’s Guide [Network
Administrator].
This section contains information on the general operation for sending faxes
and scans.
1
Press the [Fax/Scan] key in the control panel, and then press the
[Enlarge Display] key.
The Fax/Scan mode screen appears in Enlarge Display mode.
2
Position the original to be copied.
– For details on positioning the original, refer to
3
Specify the destination.
– For details on specifying destinations, refer to
.