beautypg.com

3 selecting the paper settings, 3 selecting the paper settings -6, E paper settings, refer to – Konica Minolta bizhub C353 User Manual

Page 35

background image

C353/C253/C203

2-6

Using copy functions

2

2.3

Selecting the Paper settings

The paper size can be selected automatically according to the original size or
it can be specified manually. Specify the paper size according to the
corresponding procedure, depending on the desired copy settings.

2.3.1

Automatically selecting the paper size ("Auto" Paper
setting)

The size of the loaded original is detected, and copies are produced using
paper of the same size.

If the "Full Size" Zoom setting was specified, paper of the same size as the
original is selected.

If the zoom ratio was increased or decreased, a paper size that corresponds
to the specified zoom ratio is automatically selected.

2

Note

The "Auto Zoom" setting and the "Auto" Paper setting cannot both be selected
at the same time. If the "Auto Paper Select" was selected at the "Auto Zoom"
setting, the Zoom screen appears. Touch the button for the desired zoom ratio.

2

Reminder

When copying after selecting a paper tray with letterhead paper selected as the
paper type, the copy speed will be slow, even with single-sided copying, since
the paper alignment operation is performed.

1

In the Basic screen, touch [Paper].

The Paper screen appears.

This manual is related to the following products: