Konica Minolta bizhub C353 - Manual (Page 52)

C353/C253/C203 2-23
Using copy functions 2
3
Select the desired settings.
– When finisher FS-609 is installed, touch the button for the desired Center
Erase setting. To erase the area along the center, touch [Erase]. To not
erase the area along the center, touch [None].
– To cancel the setting, touch [No].
4
Touch [OK], and then touch [OK] in the next screen that appears.
Otherwise, touch [Main Screen].
The Basic screen appears again.
When the saddle stitcher is installed on finisher FS-519
When finisher FS-609 is installed