Konica Minolta bizhub PRO 920 - Manual (Page 99)

6 Configuring Destination for the Network Scanner Features
6-14 bizhub PRO 920 Scanner
– If a large number of registrations have been made and the desired
Name is not displayed on the page, press
/ to switch be-
tween pages.
– At maximum, 100 destinations can be registered to one Group.
Multiple E-Mail addresses can be registered. As for the HDD, FTP
server and SMB server, one for each can be registered to a Group.
6
Press the [List] key.
The list of destinations to be registered is displayed.
7
Confirm the list, and press the [OK]
key.
8
If there is no problem, press the [OK] key.
This brings you back to the Select Destinations/Storage Locations
screen (Group).
9
Make sure that the registered Name
is displayed.
!
Detail
If a large number of registrations have been made and the desired Name
is not displayed on the page, press
/ to switch between pages.
On the Select Destinations/Storage Locations screen (Group), press the
[List] key and then press the [Group] key to display the list of registered
destinations. Press the [Edit] key on this screen to change what to include
in a Group.
00_920_scan_e.book Page 14 Thursday, April 28, 2005 5:04 PM