Konica Minolta bizhub PRO 920 - Manual (Page 109)

7 Using the Network Scanner Features
7-10 bizhub PRO 920 Scanner
5
Configure the necessary items.
– For more information on the
configurations on the Scanner
Setting Basic screen, refer to
"About the Scanner Setting Ba-
sic Screen" on Page 8-3.
6
Set an original and press the [Start] button.
The original is scanned, and the scanned data are stored in an speci-
fied destination.
7
To continue transmission, go back
to the step 5 and repeat the proce-
dure.
To stop scanning, press [Address].
– Then, the Select Destination/
Storage Locations screen re-
turns.
– When a lot of original is scanned, [Job Reserve] is indicated on the
screen during the scanning process.
– You can press [Job Reserve] and set the next job. Immediately
upon completion of the previous job, you can set the original and
press the [Start] button.
00_920_scan_e.book Page 10 Thursday, April 28, 2005 5:04 PM