Konica Minolta bizhub PRO 920 - Manual (Page 92)

Configuring Destination for the Network Scanner Features 6
bizhub PRO 920 Scanner 6-7
6.3 Registering the HDD
If you want to store the scanned data on the internal HDD, you need to reg-
ister boxes on the internal HDD.The registration is done in the following
steps.
!
Detail
For E-Mail/FTP/HDD/SMB, destinations can be registered as many as
500 in sum.
1
Press the [Scan] on the control panel.
2
Press the [HDD] key.
– In the initial settings, the Select
Destinations/Storage Locations
screen (E-Mail) is displayed. For
information on the initial settings
of the Scan screen, contact your
administrator of the copier.
3
Press the [Address Input] key.
– If the Box Number is already
registered, the Name is dis-
played.
– In the initial settings, such index
keys as [A-C] and [D-F] are dis-
played.
– On how to edit/delete a registered Box Number, contact your ad-
ministrator of the copier.
The Address Input screen appears.
4
Configure the necessary items on
the Address Input screen. Pressing
an each item displays the character
input screen.
– For more information on how to
input characters, refer to "How
to Input Characters" on Page 3-7.
– If you want to use this copier as a scanner, it is recommended that
an administrator assigns a Box Number to each user and informs
the assignment by an E-Mail in advance.
– The Box Number can protect each user's data.
00_920_scan_e.book Page 7 Thursday, April 28, 2005 5:04 PM