Konica Minolta bizhub PRO 920 - Manual (Page 110)

Using the Network Scanner Features 7
bizhub PRO 920 Scanner 7-11
When a Box is Not Registered
1
Follow the Step 1 to 2 of "When a Box is Already Registered" on Page
7-9.
2
Press the [Address Input] key.
– If you want to select the regis-
tered box, refer to "When a Box
is Already Registered" on Page
7-9.
The Address Input screen appears.
3
Press the [UserBoxNumber] key.
4
Input a UserBoxNumber and press
the [OK] key.
– Input a 9-digit (000000001-
999999998) UserBoxNumber.
The boxes storing scanned data
are managed by 9-digit User-
BoxNumber. Be sure to record this number.
– You need the number when you import scanned data from comput-
ers.
5
Press the [Scan Setting] key.
The Scanner Setting Basic screen
appears.
6
Follow the Step 5 and after of "When a Box is Already Registered" on
Page 7-9.
00_920_scan_e.book Page 11 Thursday, April 28, 2005 5:04 PM