Konica Minolta bizhub C451 - Manual (Page 325)

Specifying Utility mode parameters 7
C451 7-33
5
Type in the password again, and then touch [OK].
– To cancel changes to the settings, touch the menu item name in the
Bookmark screen to return to the selected screen without applying
the changes to the settings.
– To finish specifying settings in the Utility mode, press the [Utility/
Counter] key. Otherwise, exit the Utility mode by touching [Close] in
each screen until the screen for the Copy, Fax/Scan or User Box
mode appears.
The password for the user box administrator is specified and use by the
user box administrator is permitted.
2
Reminder
If “Password Rules” is set to “Enable”, only a password with 8 digits can
be specified.
If a user box password containing less than 8 characters has already
been registered, change the password so that it contains 8 characters
before setting “Password Rules” to “Enable”. For details on the pass-
word rules, refer to the User’s Guide [Copy Operations].