Konica Minolta bizhub C451 - Manual (Page 303)

Specifying Utility mode parameters 7
C451 7-11
Registering annotation user boxes
Settings can be specified for the following when registering.
New screen 1/3
New screen 2/3
New screen 3/3
2
Reminder
If “Password Rules” is set to “Enable”, only a password with 8 digits can
be specified.
Parameter Description
User Box No. The next available user box number is displayed. To specify a user box
number, touch [User Box No.], and then use the keypad to type in the user
box number (between 1 and 999999999).
User Box Name Touch [User Box Name], and then use the control panel keypad and the key-
board that appears in the touch panel to type in the user box name (20 char-
acters or less). The same user box name can be specified for a multiple
number of user boxes if the boxes have been given different user box num-
bers.
Password Specify a password to limit access to the user box. Touch [Password], use
the control panel keypad and the keyboard that appears in the touch panel
to type in the password (8 characters or less).
Parameter Description
Count Up Select whether the count for the annotation number is formatted by jobs or
by pages.
Secondary Field Text can be added to the number that is printed. A maximum of 20 charac-
ters can be entered.
Date/Time Select the format for the date and time that is printed.
Density Select the density for the annotation numbers that are printed.
Number Type Select the output format (number of digits) for the annotation numbers that
are printed.
Print Position Select the printing position.
Primary Field Text can be added. A maximum of 40 characters can be entered.
Parameter Description
Auto Document
Delete Time Select the time until the document is deleted after it is saved in the user box.