Konica Minolta bizhub C451 - Manual (Page 217)

Sending a user box document 5
C451 5-15
Directly specifying an SMB destination
Settings can be specified for the following.
2
Note
If “Manual Destination Input” (displayed by touching [Security Settings]
on the Administrator Settings screen, then [Security Details]) is set to
“Restrict”, [Direct Input] does not appear.
1
From the Use Document screen, select the document to be sent, and
then touch [Send].
2
Touch [PC (SMB)] on the Direct Input tab.
A screen appears, allowing you to type in the host name for the desti-
nation and the file path.
Parameter Description
Host Name Specify the host name (in uppercase letters) or IP address for the des-
tination. Type using the keyboard that appears, and then touch [OK].
File Path Type the path to the destination folder in uppercase letters.
User Name Type in the user name used to log on, and then touch [OK].
Password Specify the password. Type using the keyboard that appears, and then
touch [OK].
Reference Check the structure of the folders on the destination computer. This
can be used to directly specify the destination folder.