Konica Minolta bizhub C451 - Manual (Page 144)

Printing a user box document 4
C451 4-9
Specifying single-sided/double-sided printing
Select whether a single-sided or double-sided copy of the document is to be
printed.
% Touch [1-Sided] or [2-Sided].
Specifying Finishing settings
Specify settings for collating, grouping, stapling, hole punching, folding/
binding or center stapling/folding. Settings can be specified for the following.
Parameter Description
Sort Select this setting to feed out copies of the document by sets.
Group Select this setting to feed out copies of the document by page.
Offset Select this setting to separate the sets or pages of the copies.
If a finisher is installed, the printed pages are fed out with each set
shifted to separate it.
If no finisher is installed, the printed pages are fed out sorted in an
alternating crisscross pattern.
Staple Select one of these settings to bind copies with a staple in the corner
(upper left or upper right) or with two staples. The stapling position
can also be selected.
Punch Select a setting to punch holes in copies. The position of the
punched holes can also be selected.
Half-Fold (Center Staple/
Fold): Select this setting to fold copies in half before feeding them out.