Konica Minolta bizhub C451 - Manual (Page 145)

Printing a user box document 4
C451 4-10
!
Detail
The feeding method when a finisher is installed can be changed from Ad-
ministrator mode. For details on the Finishing settings, refer to the User’s
Guide [Copy Operations].
When a Fold/Bind or a Center Staple/Fold setting is selected, “Sort” is
automatically selected, and the “Group”, Offset, Staple and Punch set-
tings are canceled.
2
Reminder
In order to select a Fold/Bind or a Center Staple/Fold setting, all of the
following conditions must be met.
The paper width must be between 7-3/16 and 12-1/4 inches on the North
American (inch) model (between 182 and 314 mm on the European (met-
ric) model).
The paper length must be between 10-1/8 and 18 inches on the North
American (inch) model (between 257 and 458 mm on the European (met-
ric) model).
In order to use a Fold/Bind setting, optional finisher FS-608 must be in-
stalled.
In order to use a Center Staple/Fold setting, optional finisher FS-519
must be installed.
Center Staple (Center
Staple/Fold):
Center Staple & Fold
(Fold/Bind) Select this setting to staple copies at two places along the center be-
fore feeding them out.
Tri-Fold (Fold/Bind): Select this setting to fold copies in three before feeding them out.
Parameter Description