Konica Minolta bizhub C352 - Manual (Page 40)

Scanning documents 2
C352 2-7
Sca
nnin
g
do
cu
men
ts
Chapter 2
2
Touch [Program].
The selected destinations are listed under “Broadcast Destinations”.
Other destination addresses can be added using the address book or
through direct input.
Only the destinations that can be specified are displayed. For example,
fax destinations are not displayed.
3
Touch [Scan Settings] to check the specified scan settings. The spec-
ified settings can also be changed.
– For details on the scan settings, refer to “Specifying the scan set-
tings” on page 2-43.
4
After checking the settings, touch [OK].