Konica Minolta bizhub C352 User Manual
Page 124
Specifying settings from the control panel
3
C352
3-13
Sp
ecifying
se
tt
ing
s
f
ro
m
th
e cont
ro
l pan
el
Chapter 3
3
Touch [New].
The Register FTP screen appears.
4
Touch [Name] and type in the name using the keyboard that appears
on the screen.
5
Touch [OK].
6
Touch [Host Address].
–
Enter the host address or IP address.
–
To enter the host address, check that [Host Name Input] is select-
ed, and then type in the host address using the keyboard that ap-
pears on the screen.
–
To enter the IP address, touch [IP Address Input], and then enter
the value. To change an entered value, touch [
←] and [→] to move
the cursor to the desired position, and then type in the desired val-
ue.
–
If [IP Address Input] is touched after entering the host address, the
host address is cleared.
–
If the IP address is entered first, then [Host Name Input] is touched,
the IP address that was entered is displayed in the text box.
–
If selecting [Host Name Input], check that the DNS settings are
specified correctly before making the selection. For details, refer to
“TCP/IP settings” on page 3-47.
7
Touch [OK].