Konica Minolta bizhub C352 - Manual (Page 352)

Specifying settings using PageScope Web Connection 4
C352 4-95
Sp
ecif
yin
g
se
tt
in
gs
u
s
in
g Pag
e
Scope
We
b Co
nne
ctio
n
Chapter 4
4.29 E-Mail Setting
E-Mail RX (POP)
You can specify the settings to perform the authentication of the e-mail
sender with POP Before SMTP.
Item Description
E-Mail RX Setting Specify whether to use the e-mail reception setting.
POP Server Address Enter the receiving POP server address (syntax: “***.***.***.***”
or FQDN where the input range of *** is 0 to 255). When
entering the host name, select the “Please check to enter host
name.” check box.
Login Name Enter the user name used to log on to the POP server (up to
63 characters).
Password Enter the password for logging on to the POP server (up to 15
alphanumeric characters).
APOP Authentication Enables/disables APOP authentication.
Connection Timeout Specify the connection timeout of the server (input range: 30
to 300 seconds).
Port No. Enter the server port number (input range: 1 to 65535).
Use SSL/TLS
Port No. (SSL/TLS) Select to use SSL/TLS. Also, enter the port number to be
used.
Auto Receive Check Select whether to enable Auto Receive Check for e-mails re-
ceived.
Polling Interval If “Enable” was selected in Auto Receive Check, specify the
polling interval time (input range: 1 to 60 minutes).