Konica Minolta bizhub C352 - Manual (Page 244)

Specifying settings from the control panel 3
C352 3-133
Sp
ecifying
se
tt
ing
s
f
ro
m
th
e cont
ro
l pan
el
Chapter 3
3.34 OpenAPI settings
Specify whether or not the interface is open to software with a function for
communicating with the copier. The settings for “Access Setting”, “Port
No.”, “SSL”, and “Authentication” of OpenAPI can be changed.
Access Setting
Sets whether to permit access from other systems that use OpenAPI. (De-
fault setting: Allow)
1
In the Administrator Setting screen, touch [System Connection]. (Refer
to page 3-8 for more details.)
2
In the System Connection screen, touch [1 OpenAPI Setting].
3
In the OpenAPI Setting screen, touch [Access Setting].
Buttons for selecting settings appear.
4
Touch the desired selection key.
– To permit access using OpenAPI, touch [Allow].
– To prohibit access using OpenAPI, touch [Restrict].
Access using OpenAPI is set to be permitted or prohibited.