Konica Minolta bizhub C352 - Manual (Page 31)

1 Before using the scan functions
1-12 C352
Be
fo
re
u
s
in
g t
he sca
n
f
unct
ion
s
Chapter 1
1.5 Flow chart of setup and scanning operations
The sequence from the setup operations required to use the scanning func-
tions to the scanning operation is shown below.
Specify scan settings in the screen that appears after pressing the [Utility/Counter] key,
then touching [User Setting].
* Specify basic settings such as the format in which scanned data is saved. (Refer to
“Setting the main scan mode screen” on page 3-30 and “Setting the save format of the
data to be scanned” on page 3-34.)
Specify network settings in the screen that appears after pressing the [Utility/Counter]
key, then touching [Administrator Setting].
* Specify settings in order to use the machine on the network. (Refer to “TCP/IP settings”
on page 3-47, “NetWare settings” on page 3-54, “http server settings” on page 3-59,
“FTP Setting” on page 3-66, “SMB Setting” on page 3-69, “AppleTalk Setting” on
page 3-73, “Enabling LDAP” on page 3-75, “Setting up LDAP Settings” on page 3-77,
“Search Default Setting” on page 3-86, “E-Mail TX (SMTP) settings” on page 3-87, “E-
Mail RX (POP) settings” on page 3-95, “Device settings” on page 3-99, “Time adjustment
settings” on page 3-101, “Status notification settings” on page 3-104, “Total counter re-
port setting” on page 3-106, “PING Confirmation” on page 3-111, “SLP settings” on
page 3-115, “LPD settings” on page 3-116, “Prefix/Suffix settings” on page 3-117, “Job
for the disable proof” on page 3-121, “SNMP settings” on page 3-123, “Bonjour Setting”
on page 3-129, “TCP Socket Setting” on page 3-131, “OpenAPI settings” on
page 3-133, and “External server authentication” on page 3-138.)
Register destinations in the screen that appears after pressing the [Utility/Counter] key.
* Specify e-mail addresses for e-mail transmissions, register FTP servers, and
specify destination computers. (Refer to “Registering abbreviated destinations” on
page 3-10, “Registering group destinations” on page 3-21, “Registering program desti-
nations” on page 3-23, and “Specifying e-mail settings” on page 3-26.)
Load the document.
Specify the destination.
Specify the scan settings (refer to page 2-43).
Press the [Start] key in the control panel.