Konica Minolta BIZHUB C360 - Manual (Page 85)

bizhub C360/C280/C220 5-14
5.7 Printing (Netware) 5
5
Load the PSERVER.NLM file on the NetWare Server console.
Then, configure the following settings in [NetWare Setting].
In the NetWare 4.x/5.x/6 Print Server mode (NDS)
0 When you select the Print Server mode, the IPX protocol must already be loaded on the NetWare server.
1
From the client, log in the NetWare file system with administrator authority.
2
Start NWAdmin.
3
Select an organization or department container for the print service, and select [Print Services Quick
Setup (non-NDPS)] from the Tools menu.
4
Fill in [Print Server Name], [Printer Name], [Print Queue Name], and [Print Queue Volume]. Then, set the
[Type] of the printer to [Other/Unknown] and click [Create].
Then, configure the following settings in [NetWare Setting].
Item Description Prior check
[IPX Setting] Select [ON].
[Ethernet Frame
Type] Select a frame type to be used. Frame type
[NetWare Print
Mode] Select [Nprinter/Rprinter].
[Print Server Name] Enter a print server name to be operated as the Nprint-
er/Rprinter (up to 63 characters, excluding / \ :; , * [ ] < > |
+ = ? .). The print server
name specified in
Step 4
[Printer Number] Enter the Nprinter/Rprinter number.
Item Description Prior check
[IPX Setting] Select [ON].
[Ethernet Frame
Type] Select a frame type to be used. Frame type
[NetWare Print
Mode] Select [PServer].
[Print Server Name] Enter a print server name to be operated as Pserver (up to
63 characters, excluding / \ :; , * [ ] < > | + = ? .). The print server
name specified in
Step 4
[Print Server Pass-
word] Enter a print server password if necessary (up to 63 char-
acters).
[Polling Interval] Set a job inquiry interval.
[Bindery/NDS Set-
ting] Select [NDS].
[NDS Context
Name] Enter an NDS context name for print server connection (up
to 191 characters, excluding / \ :; , * [ ] < > | + = ?).
[NDS Tree Name] Enter an NDS tree name for print server connection (up to
63 characters, excluding / \ :; , * [ ] < > | + = ? .).