Konica Minolta BIZHUB C360 - Manual (Page 46)

bizhub C360/C280/C220 4-10
4.3 Sending scanned data by E-mail 4
[Administrator E-Mail Address]
In the administrator mode of PageScope Web Connection, select [System Settings] ö [Machine Setting].
4.3.3 SMTP over SSL/Start TLS
[E-mail TX (SMTP)]
In the administrator mode of PageScope Web Connection, select [Network] ö [E-mail Setting] ö [E-mail
TX (SMTP)].
[Binary Division] Select this check box to divide an E-mail.
If the E-mail software that received an E-mail does not
have a restoration function, you may not be able to read
the E-mail. Restoration function
of E-mail software
[Divided Mail Size] Enter the divided mail size to divide an E-mail. Server reception limit
Item Description Prior check
Item Description Prior check
[E-mail Address] Enter the administrator's E-mail address (up to 128 char-
acters).
If the administrator's E-mail address is omitted, you will
not be able to send an E-mail.
Usually, the administrator's E-mail address is set to the
From address of the E-mail to be sent from this machine.
To enable user authentication, the user's E-mail address
is set to the From address. However, when the user's E-
mail address is not registered or S/MIME is used to send
an E-mail, the administrator's E-mail address is set to the
From address.
If [Security]ö[Restrict User Access]ö[Changing the
"From" Address] is set to [Allow], the user can change the
From address before sending an E-mail. E-mail address of the
administrator
Item Description Prior check
[Use SSL/TLS] To encrypt a communication between this machine and
the SMTP server using SSL/TLS, select [SMTP over SSL]
or [Start TLS]. Does the server sup-
port SSL or Start
TLS?
[Port Number] Enter a port number if [Start TLS] is selected.
Default setting: 25 Server port number
[Port No.(SSL)] Enter the port number to be used for SSL communication
if [SMTP over SSL] is selected.
Default setting: 465 Server port number