Konica Minolta BIZHUB C360 - Manual (Page 65)

bizhub C360/C280/C220 4-29
4.8 Sending scanned data to the WebDAV server 4
4.8.2 [WebDAV Client Settings]
In the administrator mode of PageScope Web Connection, select [Network] ö [WebDAV Settings] ö [Web-
DAV Client Settings].
Item Description Prior check
[WebDAV TX Set-
ting] Select [ON].
[Proxy Server Ad-
dress] To perform transmissions via a proxy server, enter its ad-
dress.
Format: *.*.*.* (Asterisk * can be 0 to 255)
If the DNS server has already been configured, you can
enter the host name instead.
When using IPv6, you can specify the IPv6 address. Server address
[Proxy Server Port
Number] Enter the port number of a proxy server. Server port number
[User Name] Enter the user name to log in to the proxy server (up to 63
characters).
[Password is
changed.] Select this check box to change the password.
[Password] Enter the password to log in to the proxy server (up to 63
characters).
[Chunk Transmis-
sion] Select whether to enable chunk TX (batch transmission) or
non-chunk TX (split transmission) when sending data to
the WebDAV server.
By default, it is set to [Non-Chunk Transmission]. Change
the setting to fit the target WebDAV server. Method supported
by the server
[Connection Time-
out] Enter the timeout period for a communication with a serv-
er.
[Server Authentica-
tion Character
Code] Select a character code to perform the authentication un-
der the WebDAV server.
You can use this setting when [Japanese] is specified for
the language to be displayed on the Control Panel.