Konica Minolta BIZHUB C360 - Manual (Page 205)

bizhub C360/C280/C220 10-13
10.4 Monitoring this machine by SNMP Manager 10
10.4.3 [SNMP Setting]
In the administrator mode of PageScope Web Connection, select [Network] ö [SNMP Setting].
Item Description Prior check
[IPX Setting] Select [ON].
[Ethernet Frame
Type] Select a frame type to be used. Frame type
Item Description Prior check
[SNMP Setting] Select [ON].
When you use the SNMP, select whether to use [SNMP
v1/v2c (IP)], [SNMP v3 (IP)], or [SNMP v1 (IPX)].
You can select [SNMP v1 (IPX)] only when the IPX is ena-
bled. The protocol you use
(TCP/IP or IPX/SPX)
[UDP Port Setting] Enter a UDP port number.
Default setting: 161
[SNMP v1/v2c Set-
ting] Configure the settings for SNMP v1/v2c.