Konica Minolta BIZHUB C360 - Manual (Page 54)

bizhub C360/C280/C220 4-18
4.4 Sending scanned data to the user's E-mail address (Scan to Me) 4
4.4.2 User Authentication
Configure settings to restrict users who use this machine.
When the MFP authentication is selected
When the MFP authentication is selected, do the following.
- Configure the settings required for the MFP authentication
- Register the E-mail address of each user when registering users
For details on the settings for the MFP authentication and user registration, refer to page 7-2.
When the Active Directory authentication is selected
When the Active Directory authentication is selected, do the following.
- Configure the settings required for the Active Directory authentication
- Register the E-mail address of each of the users from this machine with the server to enable this ma-
chine to obtain the address using the LDAP protocol
For details on Active Directory authentication settings, refer to page 7-10.
When the NTLM or NDS authentication is selected
When the NTLM or NDS authentication is selected, do the following.
- Configure the settings required for the NTLM or NDS authentication
- Register the E-mail address of each user in User Registration
For details on NTLM authentication settings, refer to page 7-15.
For details on NDS over IPX/SPX authentication settings, refer to page 7-19.
For details on NDS over TCP/IP authentication settings, refer to page 7-22.
4.4.3 Scan to E-Mail
Configure settings to send an E-mail.
For details, refer to page 4-9.
4.4.4 SMTP over SSL/Start TLS
Configure the settings for SMTP over SSL or Start TLS.
For details, refer to page 4-10.
4.4.5 SMTP Authentication
Configure SMTP authentication settings.
For details, refer to page 4-12.
4.4.6 POP before SMTP
Configure the settings for POP before SMTP.
For details, refer to page 4-13.
4.4.7 POP over SSL
Configure the settings for POP over SSL.
For details, refer to page 4-14.