Konica Minolta MAGICOLOR 2300 - Manual (Page 71)

Maintaining the Printer 63
Do not open the printer during printing.
Do not tap paper stacks on the printer.
Do not tilt, lubricate, or disassemble the printer.
Do not touch the electrical contacts, gears, or laser beam devices. Doing
so may damage the printer and cause the print quality to deteriorate.
Keep media in the output tray at minimum level. If the media stacks too
high, your printer may experience media jams and excessive media curl.
Make sure two people are available to
lift the printer when moving it.
When moving the printer, keep the
printer level to avoid toner spillage.
When lifting the printer, grasp the
handles at the top of the Tray 1 and at
the bottom-right side of the printer (or
the handles at the bottom of the duplex
unit if it is installed).
If you get toner on your skin, wash it off with cool water and neutral
detergent.
WARNING!
If you get toner in your eyes, wash it out immediately with cool water
and consult a doctor. Material Safety Data Sheets (MSDS) information
can be found at www.konicaminolta.net/printer/ (click on “Answer
Base”).
Make sure any parts removed during cleaning are replaced before you
plug in the printer.
Front