Konica Minolta MAGICOLOR 2300 - Manual (Page 32)

Output Tray 24
Output Tray
All media is output to the output tray on top of the printer. The face-down
output tray has a capacity of 150 sheets (legal-size) or 200 sheets (letter/A4)
of 22 lb (80 g/m
2 ) bond paper.
If the media is stacked too high, your printer may experience media
jams, excessive media curl, or static buildup.
Remove transparencies as soon as possible from the output tray to
avoid static buildup.
Media Storage
How do I store media?
Keep media on a flat, level surface in its original wrapper until it is time to
load it.
Media that has been stored for a long time outside of its packaging may
dry up too much and cause jamming.
If media has been removed from its wrapper, place it in its original
packaging and store in a cool, dark place on a level surface.
Avoid moisture, excess humidity, direct sunlight, excess heat (above
95°F/35°C), and dust
Avoid leaning against other objects or placed in an upright position
Before using stored media, do a trial printing and check print quality.
Additional Assistance
Where can I order KONICA MINOLTA-approved media or
get more information?
Check http://printer.konicaminolta.net/support (click on "Answer Base") for
currently approved media. To order approved transparency media, go to
www.q-shop.com.
See the Service & Support Guide for a list of sources of service and support
for many areas of the world. The most current worldwide information can be
found at www.konicaminolta.net/printer/.