Konica Minolta MAGICOLOR 2300 - Manual (Page 65)

Replacing Consumables 57
Removing the Used OPC Drum Cartridge
1
With the front door open and the
used waste toner bottle removed
(see page 55), rotate the transfer
belt unit release lever clockwise to
the top (11 o’clock) position.
This releases the pressure on the
transfer belt unit.
2
Grasp the release lever for the OPC
drum cartridge, and then pull the
cartridge straight out about 6 inches
(15 cm).
3
Support the bottom of the drum with
your hand, then carefully pull the
cartridge toward you and remove it.
Dispose of the cartridge
properly according to your
local regulations.