ATTO Technology Diamond Storage Array S-Class - Manual (Page 49)

38
Fibre Channel CLI commands
FcPortInfo
Retrieves information about the current state of each
Fibre Channel port. The status field indicates ‘disabled’
when a port has been internally disabled.
Immediate command: FcPortInfo
FcPortList
Lists the status of all available Fibre Channel ports.
Get syntax: FcPortList: [line count]
FcPortName
Returns the Fibre Channel port name stored in NVRAM
for this Fibre Channel port.
Get syntax: get FcPortName [port number]
FcWWName
Sets or view the Word Wide Name (WWN) of the
referenced Fibre Channel port. The WWN is a unique 8-
byte number that identifies the port on a Fibre Channel
network. Only the three least significant bytes of the
WWN can be modified. Fabric and loop operations are
unpredictable if duplicate WWNs are assigned.
Default: 20 00 0x where x is for 0 for port 0, 1 for port 1
Set syntax: set FcWWName [PortNumber [0 | 1]
Requires a SaveConfiguration command
Get syntax: get FcWWName [PortNumber [0 | 1]