Replacing the hard disk drive or solid-state drive – Lenovo ThinkPad 11e User Manual
Page 129

1. Install the coin-cell battery
1
. Then attach the connector
2
.
2. Install the cover
1
and pivot it downwards
2
. Then tighten the screws
3
.
3. Turn the computer over again. Connect the ac power adapter and all cables.
Replacing the hard disk drive or solid-state drive
Before you start, print these instructions.
Attention: The hard disk drive or solid-state drive is very sensitive. Incorrect handling can cause damage
and permanent loss of data. Observe the following guidelines:
• Replace the hard disk drive or solid-state drive only if you upgrade it or have it repaired. The connectors
and slot of the hard disk drive or solid-state drive are not designed for frequent changes, or drive
swapping.
• Do not drop the drive or subject it to physical shocks. Put the drive on a material, such as soft cloth, that
absorbs any physical shocks.
• Do not apply pressure to the cover of the drive.
• Do not touch the connector.
• Before removing the hard disk drive or solid-state drive, make a backup copy of all the information
on it, and then turn the computer off.
.
113