Lenovo ThinkPad 11e - Manual (Page 123)

4. Press out on the latches on both edges of the socket at the same time 1 , and then remove the memory
module 2 to make room for the new one.
5. Find the notch on the contact edge side of the memory module you are installing. With the notched
end of the memory module toward the contact edge side of the socket, insert the memory module
1 into the socket at an angle of about 20 degrees; then pivot the memory module downward until
it snaps into place 2 .
Attention: To avoid damaging the memory module, do not touch its contact edge.
Chapter 9 . Replacing devices 107